Silicone Injection Molding Machine System Operate Principle

Some people don`t understand how the LSR silicone injection molding machine works, what its principles are, what its workflow is, and why it is more convenient and faster. In this issue, Jinyu Machinery has made a simple and intuitive introduction for everyone. 1. Measure the required two component materials, material A and material B, to the injection device through a special conveying system. 2. Enter the quantitative cylinder to control product materials. 3. The material passes through the static mixing device and enters the barrel. To prevent premature curing of the combined LSR material, the barrel is water jacketed and allows for closed-loop thermal regulation. 5. The injection system uses a zero-compression short L/D LSR screw to meter the material through the LSR tip assembly, then through a pneumatic or hydraulically driven, liquid-cooled, pin-type shut-off nozzle during the injection process, and finally through the special LSR nozzle tip and into mold. 6. Open and close the mold in the vertical direction for heating and forming. Cabin decompression control system Overall mold temperature control system Automatic chiller cooling system Mold vacuum system (vacuum pump, vacuum switch, interface, control software)

Jinyu Silicone Machines Have Been shipped In Several Batches

We shipped silicone machines, PVC machines these days. Have a look how we ship to inland or abroad. Here are silicone or PVC dispensing machines, 16/18 colors automatic dispensing machine. Silicone rubber PVC pacthes making machine mainly used for dripping different color material to the mold. Dispensing Machines, which are also called glue applicators, glue dispensers, glue machines, glue filling machines, etc., which are specially designed to control fluids. Silicone injection molding machines, also known as silicone machines, strictly speaking, silicone hydraulic machine, heat press molding machine,silicone rubber mixing machine, etc.There are also Silicone Label Embossing Machines, which emboss and dmboss the labels of silicone

Our silicone machines assembly area is busy these days

This is the site of Jinyu Precision Machinery`s assembly workshop. Jinyu`s machines are independently developed and produced. We have more than 20 years of experience in the rubber and plastics industry, specializes in silicone product manufacturing machines, PVC product manufacturing lines, and KPU shoe material machines.We started manufacturing PVC dispensing equipment in 2000, and now we are manufacturing silicone dispensing machine, PVC dispensing machine, silicone rubber hyraulic machine, silcione injection molding machine, PVC intelligent oven, automatic robot arms, and other other related machines. We have a complete production line equipment and provide a complete set of production process solutions, including mold supply, material supply, and multiple technical guidance. We are a high-tech enterprise integrating R&D, design, production, sales and after-sales service. We have multiple patents and are highly praised by customers at home and abroad. This is the silicone hydraulic press equipment assembly area. There are 30 tons, 50 tons, 63 tons, and 100 tons hydraulic presses, with or without vacuum, models with or without shell, and models with front top automatic mold opening or without. The model with front top is specially designed for silicone label transfer, etc.

Updated Automatic Silicone Hydraulic Machine Of Jinyu Machinery

Silicone hydraulic machine also called rubber hydrualic molding machine / hydraulic vulcanizing press machine / silicone & rubber compression molding hydraulic press, etc. According to different processes, it is also called flat vulcanizing machine, vacuum vulcanizing machine, foam board vulcanizing machine, rubber vulcanizing machine, silicone vulcanizing machine, etc. Acoording to different structures, there are Three-beam and four-column hydraulic press / oil press / water press / air press, etc. The vulcanizing machine / hydraulic machine is a machine for vulcanizing various rubber and plastic products. It has functions such as timed mold locking, automatic pressure compensation, automatic temperature control, automatic timing, and time alarm. The vulcanizing / hydraulic machine is divided into three forms: electric heating, steam heating and thermal oil heating. Jinyu Machinery's hydraulic machine is specializing in making silicone products. That is three-beam and four column hydrualic press, thermal oil heating and also come with vacuum. There are 30/50/63/100 Ton different types, The greater the tonnage, the greater the pressure, and the larger the products we make. Jinyu Machinery specializes in making silicone products, such as silicone mobile phone cases, silicone tableware, silicone maternal and child products, silicone kids toys, silicone bowls and spoons, and silicone trademarks/labels. , silicone protective covers, silicone non-slip placemats, silicone cup sleeves, silicone sealing

What Silicone Machine Do You Need For Your Silicone Production?

Silicone has a wide range of uses and can be seen in our daily lives, such as mobile phone casings or earphone covers in the electronics industry, daily necessities and kitchen utensils, maternal and infant products and toys, etc. Silica gel is a relatively advanced product in the rubber and plastic industry. A kind of material, so silicone products are generally high-end products. So how are these silicone products produced? What equipment and machines are needed? What are the steps? Below is Jinyu Machinery`s introduction to a series of silicone machines for manufacturing silicone products. 1. Machines used for solid silicone. These machines are mainly used to make single-color silicone products. And it is made of solid silicone raw materials, with a simple process, mainly vulcanization molding. The rubber mixing machine is used to add vulcanizing agents, color pastes and other additives to the raw materials to produce the product color. This is a process that cannot be omitted. The silicone cutting machine is used to cut the refined rubber material into the size and weight required for molding. It is not only precise in cutting, but also high in efficiency. If you are only making miscellaneous silicone parts, you can use manual methods to draw out the glue. Electronic banger: According to the weight of the silicone product, use an electronic banger to weigh it. Hydraulic press (also called flat plate vulcanizing machine):

How To Operate The LSR Silicone Injection Molding Machine?

Preparations before starting the injection molding machine 1. Wear safety protective clothing according to workshop regulations before production. Clean the environment around the equipment. Do not store items unrelated to production. Clean the inside and outside of the workbench and equipment, and wipe the injection seat guide rail and mold closing part with clean cotton yarn. 2. Check whether the equipment's control switches, buttons, electrical circuits, operating handles, and handwheels are damaged or faulty. Every switch and handle should be in the "off" position. Whether the safety protection devices of all parts of the equipment are intact and whether the work is sensitive and reliable. Check whether the "emergency stop" test is effective and reliable, whether the safety door slides flexibly, and whether the limit switch can operate during the switching process. The safety protection devices on the equipment (such as mechanical lock levers, stop plates, safety protection switches, etc.) are not allowed to be moved at will, modified or intentionally disabled. 3. Check whether the screws in each part are tight and whether they are loose, whether the cooling system, cold runner, oil pump, etc. are normal. If there is any abnormality or damage, report it to the foreman. It should be handled by the foreman or the maintenance personnel should be notified. Check each cooling water pipeline and test the water flow to see if the water flow is smooth and whether it is clogged or dripping. Check whether there is foreign matter in the AB barrel and whether there is material. Prevent dust and debris from falling into the barrel.

Why Do You Need To Dilute Silica Gel When Making Silicone Products?

Under normal circumstances, when customers use liquid mold silicone to make molds, they will not deliberately dilute the silicone. They can solidify the silicone and become a silicone mold according to normal operating techniques. But there are also special cases. Some will add a certain amount of silicone oil and other substances to dilute the silica gel. What is the purpose of doing this? Is it necessary? By the way, you can use Jinyu Machinery silicone mixing machine, or other silicone machines. One of the reasons for dilution: The main components of liquid silicone are silica, silicone oil, 107 base rubber and other raw materials; however, in order to reduce production costs, many manufacturers add large amounts of silica (the cost of silica is lower, add more powder and less powder). Refueling, the overall cost decreases, but the quality also decreases), resulting in a greatly reduced fluidity of liquid silicone and a high viscosity; this kind of liquid mold silicone with high viscosity and no fluidity is inconvenient for customers to operate, and it is difficult to remove air bubbles , the finished product qualification rate is very low. Therefore, in this case, for liquid silicone with high viscosity and poor fluidity, silicone oil, that is, a diluent, will be added to achieve the dilution effect and improve the fluidity; after adding silicone oil, the hardness of the liquid silicone will decrease accordingly. , the performance of silicone will be reduced accordingly. It is generally recommended that customers add no more than 10% of silicone oil. For every 2% of silicone oil added, the hardness of liquid silicone after curing will be reduced by 1 degree, and the t

Silicone material trademark making machine

Here I will introduce you a machine for making silicone trademarks. This is automatic dispensing machine, also called silicone patches machine, of course it used in both silicone and PVC. As long as it is liquid material. To make soft rubber logo patches, we need this machine for fill the liquid material into the mold, Jinyu machinery has different types of dispensing machines, there are 8/12/16/18/24 colors for multi-colored products. Main Features: 1. Three-axes linkage, support high-speed continuous interpolating of any 3D curve, the speed reaches 999 mm/s. 2. High-speed ladder-shaped acceleration and deceleration, handle the continuo speed based on speed forecasting technology. 3. Humanized software design idea, easy for study and use. 4. Excellent compatibility, support many design software(including JD paint, Auto CAD, Coreidraw) and various file form-wt which generated. In addition, it also support scanning and teaching programming, without and limit on the graphic track planning. 5. Fast parameter setting and debugging, connection with PC, can amend the graphic immediately, and run it right now.

The difference between PVC slippers and EVA slippers by PVC Making Machinery

Slippers are a necessity in our lives and are used basically every day in the shower. Common slipper materials include PVC and EVA, so what are the differences between the two? Let me introduce them to you below. JINYU MACHINERY PROVIDE PVC MACHINES. 01Different production materials: The material used in EVA slippers is ethylene/vinyl acetate copolymer (also known as ethylene-vinyl acetate copolymer), which is made by copolymerizing ethylene (E) and vinyl acetate (VA). PVC slippers are made of PVC (polyvinyl chloride) and plasticizers, foaming agents and other additives. 02Texture is different: PVC slippers have excellent plasticity, are comfortable to wear, and have good anti-slip effects. They are easy to make into slippers of various designs and colors. EVA slippers have good softness and elasticity, but are not wear-resistant. They will easily slip over time and require anti-slip treatment. 03Different production processes: PVC foam soles use PVC as the basic raw material, add plasticizers, foaming agents and other auxiliaries, and then knead, mold, pull and punch, and finally use the molded foaming method. Non-foaming shoe climbing materials are made by kneading, granulating, and then injection molding. No foaming agent is added to the shoe climbin

Happy Start To Work In The Chinese Dragon Year Silicone Machine Manufacture

The Spring Festival, also known as the New Year, is the traditional Chinese New Year calculated according to the lunar calendar. We have happily spent a long holiday, and now we start work on the first day of the new year. We also have a sense of ceremony to welcome the God of Wealth in various places in China, which means a good beginning, good luck, abundant wealth, getting richer and richer full of happiness in the new year. We also wish all our customers and friends good fortune, good health, all the best, and happiness for their families. We will continue to provide you with silicone glue dispensing, PVC trademark gifts, 3D jewelry production solutions, clothing trademark logo printing embossing machine, rubber injection molding machine, hydraulic machine, vulcanizing machine, silcione heat transfer label machine, automatic dispensing machine, and other more machines.

What Is LSR Liquid Silicone Injecton Molding Machine?

Injection molding, injection moulding, injection molding press, compression molding, compression moulding, hydraulic molding, hot press molding, vulcanization molding, etc. Here we focus on liquid silicone injection molding, which is LSR silicone injection molding machine. Injection molding, one-time compression molding is to mix liquid silicone materials A and B in proportion to the injection mold, and then close the mold, through the vacuum cold runner, hydraulic pressure Thermoforming. Liquid silicone injection molding-compression molding applications: silicone sealing rings, silicone medical supplies, silicone aerospace ship industry auto parts, silicone daily necessities, silicone electronic accessories, silicone children's products, silicone home furnishings, silicone maternal and infant products, silicone toys, silicone jewelry, silicone Trademarks, etc. Molding process plasticizing system LSR is a two-component liquid material, divided into component A and component B. The work of the mixer fully mixes component A and component B in a precise 1:1 ratio. And because some products are colored, they are equipped with a color pump set and a color measurement part. A+B components, additives, colors, etc. are fully mixed and then enter the plasticizing system. Different models of hydraulic pressure can be selected according to different products. Jinyu Machinery has different pressure hydraulic model configurations of 30/50/80/100 tons.

How to distinguish liquid silicone products from flat silicone products?

The production of silicone products is inseparable from the silicone molding process, and the silicone molding process is divided into two categories: solid silicone molding process and liquid silicone molding process according to different products and different silicone raw materials. The solid silicone molding process is what we call Flat press silicone. 1. Liquid silicone products Liquid silicone, as the name suggests, has fluidity. Different from flat-pressed silicone, the silicone is made by mixing and letting it stand before being injected into the material tube for injection molding. Products produced by liquid silicone are generally common to consumers, such as baby products, kitchen supplies, medical supplies and other products that have relatively high quality requirements, are environmentally friendly, non-toxic and tasteless, such as baby pacifiers, stethoscope silicone covers, etc. These liquid silicone The product is high temperature resistant, has a smooth surface, no defects, holes, joints, grinding marks, etc., and no vulcanizing agent is added during the production process. However, in comparison, the mechanical properties of liquid silicone products are not as good as those of flat-pressed silicone products. They must be carefully cared for and the pressure cannot be too high, such as baby pacifiers and baking molds. After use, they should be cleaned with hot water and air-dried. Dry. 2. Flat pressed silicone products Flat-pressed silicone is molded using a pressure molding machine at a certain temperature. It is actually uses so

Silicone Rubber Color Mixing Machine

Model NO.: Xk-250JY-J03-A-58-V2 Name: 7-inch rubber mixing machine Power supply specifications three-phase four-wire 380V three-phase four-wire 380V Control: Automatic Lubrication: Grease / Thin Oil Gap Adjustment: Manual / Motorized Color: Blue or Customer′s Reqiurement Trademark: Jinyu TUA Transport Package: Container Weight: 400KG Origin: China Jinyu Machinery Rubber Mixing Machine Following is machine application It is used for mixing rubber or plastic plastication mixing , and mixing rubber with vulcanizing agent for pressed sheet Following is machine feature 1.The roller is made of alloy chilled cast iron . Their surfaces are ahrd and wear resistance . 2.The roll us supported in both end of double row spherical bearing. Large machines adopt double bearings. So it has advantages of running smoothly , energy saving ,low noise and long service life 3.The roll nip adjustment is driven by the worm and worm wheel . it is simple for operation. The mode of nip adjustment includes manual ,electric and hydraulic adjustment in three form 4.All series mills are equipped with safety device according to the new station standards ,in

What Is Vulcanizer Different From Hydraulic Machine?

A oil hydraulic press (a type of hydraulic press) uses special hydraulic oil as the working medium and a hydraulic pump as the power source. The hydraulic oil enters the cylinder/piston through the hydraulic pipeline through the force of the pump. Then there is a certain amount of fluid in the cylinder/piston. A set of seals that cooperate with each other. The seals at different positions are different, but they all play a sealing role so that the hydraulic oil cannot leak. Finally, the hydraulic oil is circulated in the tank through the one-way valve to make the cylinder/piston circulate and perform work to complete certain mechanical actions and serve as a kind of productivity machinery. According to the structural form, hydraulic presses are mainly divided into: four-column type, single-column type (C type), horizontal type, vertical frame, universal hydraulic press, etc. Hydraulic presses include water presses and oil presses. Those that use water-based liquid as the working medium are called hydraulic presses, and those that use oil as the working medium are called hydraulic presses. The specifications of hydraulic presses are generally expressed in nominal working force (kilonewtons) or nominal tonnage (tons). Vulcanizing press (also known as: hydraulic press) is a machine that uses hydrostatic pressure, uses liquid as the working medium, and is made according to Pascal's principle to transfer energy to process metal, plastic, rubber, wood, powder and other products. Jinyu Machinery is specializing in silicone rubber vulcanzing press and silicone compression molding hydrualic press, that are suiable for silicone trademark gift, silicone phone case, ipad case, cion purse, car key case, bluetooth earhone case, toothbrush case, U disk case, zipper head, bracelet, sealing ring, various silicone electronic accessories, etc.

Is silicone heat transfer label machine good?

First, let`s understand what a silicone transfer label is. It is a label made of silicone material. It is widely used in cotton, blended fabrics, clothing brand logos, police clothing, sportswear, children`s clothing and transportation, sanitation supplies and facilities, shoes and hats. Bags etc. Three-dimensional silicone hot stamping label, 3D thick plate three-dimensional effect, soft to the touch, rich in color, strong adhesion, good washing fastness (that is, it can maintain the color of the pattern for a long time), very suitable for clothing, gloves, bags, shoes, socks, hats, sports Equipment, masks, home furnishings. High-quality thermal transfer sportswear soft hot labeling can be customized. It has high environmental protection level, strong adhesion, firm combination, good three-dimensional effect, soft and comfortable texture, clear LOGO, fine texture, beautiful colors and fashion. It is the first choice for high-end LOGO customization. product The silicone trademark signs made of this kind have high elasticity, high adhesion, strong wear resistance and strong washability. Ideal for high stretch woven knits. It is easy to use and can be directly pressed onto clothing, shoes, hats, bags and other cloth products, which can replace traditional embroidery and silk screen printing processes.

Professional knowledge For Silicone Machine Products Material

Under normal circumstances, when customers use liquid mold silicone to make molds, they will not deliberately dilute the silicone. They can solidify the silicone and become a silicone mold according to normal operating techniques. But there are also special cases. Some will add a certain amount of silicone oil and other substances to dilute the silica gel. What is the purpose of doing this? Is it necessary? One of the reasons for dilution: The main components of liquid silicone are silica, silicone oil, 107 base rubber and other raw materials; however, in order to reduce production costs, many manufacturers add large amounts of silica (the cost of silica is lower, add more powder and less powder). Refueling, the overall cost decreases, but the quality also decreases), resulting in a greatly reduced fluidity of liquid silicone and high viscosity; this kind of liquid mold silicone with high viscosity and no fluidity is inconvenient for customers to operate, and it is difficult to remove air bubbles , the finished product qualification rate is very low. Therefore, under such circumstances, for liquid silica gel with high viscosity and poor fluidity, silicone oil will be added to achieve a dilution effect and improve the fluidity; after adding silicone oil, the hardness of the liquid silica gel will decrease accordingly, and the performance of the silica gel will also decrease. It will be reduced accordingly. It is generally recommended that customers add no more

A story Of PVC Patches Dispensing Machine From Jinyu Machinery

Seeing each other again after many years is the continuation of one story and the beginning of another! Jinyu's first dispensing machine was purchased by this Russian customer in 2006. Our factory used to be in Dalingshan Town, Dongguan City. Now we are located in Songhu Information Technology Industrial Park, Chashan Town, Dongguan City. It is three times larger than before. Such drastic changes cannot be achieved without the support of customers for Jinyu Machinery, which is why Jinyu Machinery has grown today. This time, this regular customer brought his family and his successor to Jinyu Company to learn about our new equipment-liquid silicone injection molding machine. He found that we have many new equipment and upgraded machines, and he has always been interested in Jinyu Machinery (TUA). The automatic dispensing machine he bought in 2006 created value for him and put a smile on his face. Now, at the age of 60, he is full of energy. It is our honor at Jinyu to see that our customers can have such good development and proud! Jinyu's philosophy is: quality first, customer satisfaction. Only when Jinyu's equipment is of good quality can it help customers improve production efficiency and reduce labor costs, so customers can use it with con

Revolutionizing Production: The Automatic Silicone Vacuum Vulcanizing Machine

Revolutionizing Production: The Automatic Silicone Vacuum Vulcanizing Machine In a significant leap forward for manufacturing precision and efficiency, the Automatic Silicone Vacuum Vulcanizing Machine has emerged as a game-changer, bringing unparalleled advancements to the silicone processing industry. It also called hydraulic machine. Precision Meets Automation The Automatic Silicone Vacuum Vulcanizing Machine represents the cutting edge of technology in the field of silicone processing. Combining precision engineering with state-of-the-art automation, this machine has the capacity to transform raw silicone material into highly durable and precisely molded products with minimal human intervention. Efficiency Redefined With automation at its core, this machine streamlines the vulcanization process, optimizing production cycles and significantly reducing labor costs. Manufacturers can now achieve higher output levels without compromising on the quality and consistency of silicone products. The Automatic Silicone Vacuum Vulcanizing Machine sets a new standard for efficiency in the silicone manufacturing industry. Vacuum Technology for Superior Results A standout feature of this innovative machine is its utilization of vacuum technology during the vulcanization process. The vacuum ensures a complete and uniform distribution of heat, allowing for thorough curing an

What is the size of silicone hydrauli machine?

Hydraulic equipment is one of the main equipment of silicone molding manufacturers. It mainly uses the mold as the core to solidify the solid silicone at high temperatures through pressure and temperature. The machine has a large electrical power. There are many types of hydraulic presses, including professional silicone hydraulic presses, silicone rubber hydraulic presses, four-column hydraulic presses, molding hydraulic presses and frame hydraulic press series. Silicone product manufacturers can choose equipment according to product needs, with tonnage ranging from 10 tons to 5000 tons, etc., mention the size Different machines have to talk about their respective functions, the shape of the processed product, the size of the template and the stroke. The commonly used flat vulcanizing agent is a 400×400cm hot press forming mold, that is, a hot press. The largest one can also be used to 680*680cm. It is also called hydraulic press and solid state machine. It mainly uses solid silica gel (vulcanizing agent + color glue + raw material) as raw materials. It uses the temperature and pressure of the hot press to vulcanize and shape the product with the help of molds. Therefore, the hydraulic press is also a necessary machine for silicone product manufacturers. one.

Why do silicone products have bubbles? How to deal with it?

Silicone products are used very frequently in life. Many things in our daily life may be made of silicone. Sometimes when we make silicone products, we will find that bubbles will appear on the surface or inside the silicone product. For Why do silicone products have bubbles? How to deal with bubbles in silicone products? Note that this is very important for silicone product manufacturers to control the quality of the produced products. Silicone products with bubbles are very rough and not only look defective, but also feel bad to the touch. Jinyu Machinery professional will answer your questions below. There are two raw materials for the production process of silicone products, one is liquid silicone and the other is solid silicone. Here we first talk about solid silicone. 1.Vulcanization temperature that is too low or vulcanization temperature that is too high is one of the main causes of bubbling in thermally conductive silicone products. The vulcanization temperature is an important parameter when molding silicone rubber. Usually silicone products are set at 160~200°C. However, sometimes due to the mold operating time being too long or other reasons, the mold has not been heated by the vulcanizer for a long time, resulting in The temperature of the silicone molding mold is low and the vulcanization temperature of the silicone is low, which will cause bubbles in the thermally conductive silicone product after

Jinyu Machinery Siliocne Rubber Making Machines Whole Set

Silicone rubber making machines are means to use silicone or rubber material to make products, for example, the machines can make silicone gifts, key cover, phone case, earphone case, toothbrush case, zipper head, bracelet, sealing ring, watchband, labels, tags, mats, etc. The Silicone rubber making machines includes silicone dispensing machine, patch machine, silicone heat press hydraulic machine, silicone injection molding machine, silicone embossing machine, silione color mixing machine, silicone cutting machine, etc. We need those silicone machines to make Silcione products, that is silicone prodution line.

How do you manufacture silicone beads?

Silicone beads are a very popular silicone product in recent years. They are suitable for toys and accessories for adults and children. Bracelets made of silicone beads are made of high-quality environmentally friendly silicone raw materials and molded by molding technology. The products are of high quality, with exquisite appearance and fashionable style, and are in line with market consumption. Trendy, creative design, various styles and colors, can be made in single color or multi-color. High quality silicone letter beads for creating personalized jewelry · Perfect for creating unique bracelets, necklaces, and more Can be matched with a variety of colors and styles or themes · Easy to tie and long-lasting A variety of silicone letter beads, you can DIY necklaces and bracelets at will. Soft silicone beads, non-toxic and odorless, reliable and durable, not easy to break. The size of the cubic silicone beads is 12 mm, which is a suitable size, light weight and easy to carry. It is best to choose soft conjoined silicone beads. In this way, there will be no pain and it will not be easy to shift. So how are silicone soft beads made? The method of making silicone soft beads mainly includes the steps of preparing materials, mixing, mold forming, and solidification. When making silicone soft beads, you first need to prepare silicone raw materials and corresponding molds. Silicone raw materials are generally composed of silicone liquid and curing agent. Silicone materials of different hardness and color can be selected according to needs. Then mix the silicone liquid and curing agent according to a certain proportion.

Jinyu Machinery Exhibited international Machine Tools 2023

Jinyu Machinery participated in the machine tool exhibition in November 2023. At the Guangdong Modern International Exhibition Center, Jinyu Machinery has a long-term cooperation with Changsha Wangyuan Robot Company, using robot arms to operate our silicone PVC product production machines to make the machine more intelligent and automated. , everyone is welcome to consult. At this exhibition, we showed the latest upgraded 16-color dispensing machine, 18-color dispensing machine, and of course we have always had 4/8/12/24-color dispensing machines. The purpose of the dispensing machine is to produce silicone trademark gifts of various colors, PVC dolls, toys, electronic protective cases, exquisite trinkets, etc. The features of Jinyu dispensing machine: 1.Adopt the world advanced SOLIDEWORK3D software and finite element analysis of mechanical design, the optimum design is integrally molded high rigidity, precise structure, long service lift. 2.High precision, fast and liquidity walk in arc, three-dimensional. Coordinated system control, the precision can be 0.01mm, the quality is very stable, the products percent of pass can over 99.9%, can improve the working efficiency to 200-800% 3.High stability: adopts CNC engraving macine rack construction technology, the materials adopts cast iron and granite, the rack will not be out of shape in 5-8 years, adopts original imported screw rod, electrical equipment, moving stability and reliable, low failure rate.