HomeNewsSilicone Injection Molding Machine System Operate Principle
Silicone Injection Molding Machine System Operate Principle
2024-04-10
Some people don`t understand how the LSR Silicone Injection Molding Machine works, what its principles are, what its workflow is, and why it is more convenient and faster. In this issue, Jinyu Machinery has made a simple and intuitive introduction for everyone.
1. Measure the required two component materials, material A and material B, to the injection device through a special conveying system.
2. Enter the quantitative cylinder to control product materials. 3. The material passes through the static mixing device and enters the barrel. To prevent premature curing of the combined LSR material, the barrel is water jacketed and allows for closed-loop thermal regulation. 5. The injection system uses a zero-compression short L/D LSR screw to meter the material through the LSR tip assembly, then through a pneumatic or hydraulically driven, liquid-cooled, pin-type shut-off nozzle during the injection process, and finally through the special LSR nozzle tip and into mold. 6. Open and close the mold in the vertical direction for heating and forming.
Cabin decompression control system Overall mold temperature control system Automatic chiller cooling system Mold vacuum system (vacuum pump, vacuum switch, interface, control software) Mold cold plate valve gate control system Blowing pressure adjustment system Pre-dosing assembly with two-component temperature-controlled static mixer and purge valve
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
We will contact you immediately
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.