What use of clothing silicone trademark?

Silicone trademark is not firmly pressed in the production of clothing silicone trademark

Some of our customers are in production, sometimes the trademark of silicone is not strong, one button falls off, and a wash will fall off. We provide some solutions as follows:

1. When the mould is used for the first time, the following factors will affect the product pressure. The mold is cleaned with detergent after sandblasting.

2. Check whether the distance between the stroke and the mold is adjusted.

3. If silicone is two layers , the silicone in the first layer can not be baked too dry, which causes the first layer of glue to roast too long and can not be glued to the new glue.

4. Second, the use of silicone coating is not good, the proportion of silicone ink adjustment is not correct, too dry or too thin will lead to a direct pressure.

 Jinyu machinery is a professional manufacturer of Silicone Machine, provide the whole set of equipment and process solutions. also operate technical guidance, life-long service. Jnyu researched and developed Full Automatic Dispensing Machine, Special silicone&rubber Label Embossing Machine,Full Automatic Vulcanizing Hydraulic Machine,is the best foundation of the industrial. If you have any problems about making silicone product, Jinyu is the best choose to ask for.