Plastic Injection Molding Silicone Machine

Plastic injection molding Injection molding is also called injection molding. It feeds granular or powdered plastic from the hopper of the injection machine into the heated barrel. The raw material flows forward after being heated and melted, and is pushed forward by the screw. The nozzle injects at a very high speed through a nozzle at the front of the barrel. In the closed mold cavity with a lower temperature, the melt filling the cavity cools and solidifies, obtaining the shape given by the mold cavity, and then the mold is opened and the molded plastic part is ejected.

There is also liquid silicone injection molding, also referred to as LSR injection molding. LSR is a two-component liquid material, divided into component A and component B. The work of the mixer mixes component A and component B in a precise manner. Mix thoroughly in a 1:1 ratio. And because some products are colored, they are equipped with a color pump set and a color measurement part. A+B components, additives, colors, etc. are fully mixed and then enter the plasticizing system.

Dongguan Jinyu Automation Equipment Co., Ltd are specialized in the development and manufacturing of PVC label patch machine, Silicone Trademark Machine, Garments Printing machine, silicone Hydraulic Machine, silicone Embossing Machine, Silicone Dispensing Machine, silicone injection molding machine, ect.

With more than 20 years of independent research and development, we have a senior and specialized group. Our company have set up a good reputation within the industry and become the earliest production base of PVC products making machine , silicone products making machine and other related machines all over the world.