How to Extend the Service Life of the Dispensing Machine

2021-06-24

1. If the air pressure is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check whether the air pressure source is abnormal. Before the glue dispenser is used in large quantities, please try a small amount first to master the use skills of the product to avoid errors. When the test is no problem, then use the double-liquid glue machine or the double-liquid glue machine for mass production; pump The vacuum system vacuumizes the glue to remove bubbles during the mixing process, or let it stand for 10-20 minutes before use, so that the bubbles generated during mixing are removed in time, and the more glue is mixed together.
2. The machine should be unplugged when the machine is out of service for a long time. This will not only extend the life of the machine but also save a lot of electricity bills. With the needs of the ever-changing industrial development, liquid control technology and dispensing equipment are also constantly developing to ultra-high precision control and diversification and specialization.
3. To replace the rubber type, the pipeline needs to be cleaned. At this time, first close the feed valve and open the discharge valve. After the remaining rubber material is discharged from the rubber tank, close the discharge valve and open the feed valve to pour the cleaning solvent into the rubber storage tank, activate the body, and press the solvent according to the usual operation method.
4. Please clean the machine part regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so it is necessary to make a reasonable mix of glue according to the actual production situation, otherwise it will cause a waste of glue. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.

In addition, the Automatic Dispenser must be cleaned after each use, scrub the visible parts with alcohol, and frequently move parts need to be lubricated with oil or butter.

Previous: How to Solve the Problem of Glue Dripping During the Dispensing Process

Next: How to Distinguish between Dispensing Machine and Glue Filling Machine