jinyu silicone pressing machine is for making all kinds of rubber silicone products

ilicone rubber was the result of the efforts of various chemical companies across the world searching for a material that could handle extreme temperatures. The first appearance of the silicone elastomer came in 1943. It was made available for mass consumption worldwide in 1947. In the decades since its debut, this silicone material has been popular for use in automotive, food handling, electronic, medical, and construction applications, among others. This is primarily because silicone rubber has a broad working temperature range that allows it to handle high and low extremes. Silicone products also exhibit good levels of weather and chemical resistance, making them ideal for a host of outdoor and industrial uses. The silicone pressing machine is for making all kinds of rubber silicone products, like the wrist strap, phone cover, labels watchband, etc. The mainly functions of the silicone wristband pressing equipment is heating pressing by the up and down heating plate, vulcanizing the solid rubber silicone material into the shape. Our factory can support the machine, mold and material for you if you need. Plastic dropping complete of equipment manufacturer. we have cnc machine, and pvc machines, silicone machines, kpu shoes upper machines. website:jinyumachine.en.alibaba.com whatsapp/WeChat/Facebook:+8613829130058

Silicone products change the future,Silicone hydraulic machine

Silicone products change the future,Silicone hydraulic machine The media interviewed teachers and students at the University of Thailand, who developed a silicone lens that can be wound up, and the angle of shooting can be adjusted at will. According to the report, the reason for using silicone material is that the silicone is relatively soft. This silicone lens accessory has 33×33 small lenses on it. It only needs to change the film rotation amplitude to help the photo achieve the zoom effect. After different shooting experiments, it is shot. The photo works well. Silicone products not only have room for development in electronic products, but also need to use silica gel in many industries in the future. We look forward to better products appearing on the market!

jinyu PVC micro-injection machine,jinyu liquid silicon micro injection machine

More than 20 years , PVC micro-injection machine, liquid silicon micro injection machine is a brilliant flowers , small investment , few labors , seldom factory processed this soft patch ,but market was full of requirement . Clients frequently pulling their money to grab those patch became a spectacular sight ,and produced big factories. Conformed to market requirement , jinyu machine jointed with big PVC label factories to develop automatic PVC label machine to replace workers in 2000 . 20 years development and improvement , jinyu machine developed computer programming PVC label dispensing machine. jinyu machines are more and more mature that widely used in footwear , souvenir and apparels.

silicone/pvc ​automatic dispensing machine working characteristics

Many people who mention pvc/silicone dispensing machines should be familiar with the universal application of electronic glue, and the application of dispensing equipment will be more extensive and diversified. pvc/silicone automatic dispensing machine refers to a dispensing device that simultaneously controls a plurality of rubber/pvc/silicone outlets by a dispensing machine. The multi-head pvc/silicone automatic dispensing machine has a plurality of plastic outlets, and is controlled by a controller in a unified manner, and each output must be guaranteed. The glue volume is the same. Today Xiao Bian came to tell you about the working characteristics, basic parameters and application scope of long automatic dispensing machine. contact:+8613829130058(WeChat/WhatsApp/line) email:jinyumachine@hotmail.com silicone/pvc auto

About jinyu silicone press machine

The silicone press machine is the main vulcanization equipment for silicone products. The process is divided into feeding, closing, exhausting, curing, stripping and mold cleaning. The main control process is pressure, die temperature and mold pressing time. Plastic dropping complete of equipment manufacturer. we have cnc machine, and pvc machines, silicone machines, kpu shoes upper machines. website:jinyumachine.en.alibaba.com whatsapp/WeChat/Facebook:+8613829130058

The difference between silicone and PVC/silicone products

The two applications of silicone and PVC are very widely used at the moment. They can be made into mobile phone case, trademarks, coaster, photo frames, car mat, USB case and so on. What are the differences between them? 1. Different materials: PVC products are mainly made of PVC powder (polyvinyl chloride) and oil and color paste blending, and silicone products are mainly made of silicone raw materials, color paste paste, curing agent and so on. silicone has liquid silicone and solid silicone. 2. The processing technology is different: when vacuum is different, silicone is used silicone vacuum machine , and PVC is used PVC vacuum machine. Silicone products are pressed by oil press, and the PVC products are heated by baking table. 3. The appearance is different: silicone product surface is smooth, the color is bright, has the luminance, the PVC product is slightly rough than the silicone product.

knowledge of silicone rubber products/mobile phone case

knowledge of silicone products Rubber includes silicone. The adsorption capacity of silicone to water is large, the regeneration temperature is low, and the price is cheap. The good properties of silicone are often made into high temperature resistant silicone strips and silicone plate products. A large number of products in the market are silicone rubber, for example, a lot of cartoon mobile phone case, the breast filling of beautiful people, the lampshade made of silicone, and so on. Many products are inseparable from the silicone material. So what are the features and advantages of silicone products? Characteristics and advantages of silicone products: 1, high temperature: applicable temperature range -40-230 degrees C, can be used in microwave oven and oven. Microwave oven can be used for bowls and plates, lunch boxes are made of silicone.

embossing machine operation precautions

1. Mixing the color:Take an appropriate amount of silicone, a certain percentage of curing agent, and mix the color paste. 2. Vacuum the air: Place the a djusted silicone into a vacuum machine and vacuum it. 3. Put the silicone in the mold: Apply silicone to the mold and scrape off excess silicone with a spatula. 4. Hot-press molding: The temperature of embossing machine has been set ahead of time, and the running time of the embossing machine is set to about 12s. The clothes will be tiled on the operating table, and the plastic-coated mold will be placed on the side to be glued. , Slide the console to the upper mold, start the button. After the machine is finished running, the mold is removed and the trademark is printed on the clothes. Be careful of hot hands during the process. Embossing machine adaptable to products: 1. Silicone embossing on cotton T - shirts 2. The 3D logo embossing of jean 3. Heat transfer of shoes and hats 4, the gold stamping processing of clothing shoes and hats 5, Silicone labels on all kinds of super fiber fabrics

Silicone trademark is not firmly pressed in the production of clothing silicone trademark.

Some of our customers are in production, sometimes the trademark of silicone is not strong, one button falls off, and a wash will fall off. We provide some solutions as follows: 1. When the mould is used for the first time, the following factors will affect the product pressure. The mold is cleaned with detergent after sandblasting. 2. Check whether the distance between the stroke and the mold is adjusted. 3. If silicone is two layers , the silicone in the first layer can not be baked too dry, which causes the first layer of glue to roast too long and can not be glued to the new glue. 4. Second, the use of silicone coating is not good, the proportion of silicone ink adjustment is not correct, too dry or too thin will lead to a direct pressure. http://www.youtube.com/channel/UCUNCUUZbjA-2ZdOjOeRR5oA

Practical skills of dispensing machine

1. How to clean the dispensing machine ? When the dispensing machine point material, whether you point is silicone or PVC, in the day when the dispensing machine must be paid attention to cleaning this link, it is not missing, it is said that the cleaning machine is the link, the top of the dispensing machine is self cleaning function, white oil is the best choice of cleaning. If there is no silicone raw material on the same day, keep it fresh in the fridge and continue to use it for second days. It doesn't matter if you don't put it in the fridge if it's PVC raw material. 2. What is the best method for raw material filtration? Some customers said that the needle of the dispensing machine would be blocked. The reason is that the raw material is not filtered clean. I have a good idea: when you pour raw materials, you can add a filter to filter. If someone asks what kind of filtration is more suitable, we recommend a simple, affordable and easy to use -- stockings, no mistake is stockings!!! Silk stockings filter is also very convenient and practical. Clean and hygienic PVC (silica gel) material can ensure continuous and efficient production of dispensing machine.

On the knowledge of the embossing machine

Jinyu machinery has been in the industry of the embossing machine for 19 years, and its products are spread all over the country :India, Pakistan, Mexico, South America and many other countries and regions.The products are well received by the customers at home and abroad. Jinyu machinery is constantly improving and developing new embossing equipment, insisting on leading the technology and making efforts to create the core products with independent intellectual property rights.So,I'll tell you about the knowledge of embossing Embossing machine alias: glue machine, silicone machine, printing machine, hot pressing machine, silicon rubber embossing machine. Working principle:The raw material used is liquid silicone and liquid PVC .By dropping the glue to the mold, the material is directly covered with the cloth on the mold, then the cooling is made after adding the temperature, the time can be set in advance, the operation is simple, the equipment structure is compact and the oil pressure pressure is used, the performance is stable and safe, and the adhesive force of the product is strong. advantage : 1. Self counting function, automatic statistics of the number of die.

What should you notice before using jinyu pvc/silicone dispensing machine?

First, choose the right hose and needle according to the product,Adjust the distance between the needle and the mold,Drain the air from the needle.The process consists of glue distribution confirmation, glue valve testing, bubble exclusion and glue test. Dispensing valve is to control the size of the fluid and a series of variables of components, the stand or fall of dispensing valve had a great influence on the quality of the product. jinyu Dispensing valve and jinyu pvc/silicone dispensing machine adjustable precision dispensing valve,suitable for bad liquidity,medium to high viscosity fluid,such as:pvc,grease, silicone, UV glue, epoxy glue, butter, solder paste, Sealant/bottom filler,etc A variety of dispensing operations.Can meet all kinds of needle.Can be used with automatic dispensing machine.It is made of high quality stainless steel and aluminum alloy body material, corrosion resistance is strong.

jinyu dispensing machine Adopt more sophisticated mechanical movement parts

jinyu dispensing machine Adopt more sophisticated mechanical movement parts According to the dispensing technology requirements, precision stepper motors can be equipped with rails or precision servo motors equipped with screw guides. jinyu dispensing machine are widely used in manufacturing companies. During the use of equipment, precise control of adhesives and solving glue bubble problems are needed to reduce the defective rate. The quantification of glue is very important. Then the dispensing machine is very important. How to accurately control the equipment and solve the glue bubble problem? 1.If there are many bubbles in the glue, vacuum the glue and then use the dispenser to ensure the quality of the dispensed product. Bohai dispenser equipment 2. Control the use temperature of the glue, the general epoxy resin glue should be stored in the refrigerator 00c-50c, should be used half an hour before use, so that the glue fully with the use of working temperature in line with the ambient temperature of the viscosity of the glue The influence is very great, if the temperature is too low, the dots will become smaller and the wire drawing phenomenon will occur. At the same time, the temperature of the environment should also be guaranteed. The moisture content of the small gel dots can dry out and affect the adhesive forc

Jinyu patented dispensing valve precision pvc/ silicone glue dispensing valve

adjustable precision dispensing valve,suitable for bad liquidity,medium to high viscosity fluid,such as:pvc,grease, silicone, UV glue, epoxy glue, butter, solder paste, Sealant/bottom filler,etc A variety of dispensing operations.Can meet all kinds of needle.Can be used with automatic dispensing machine.It is made of high quality stainless steel and aluminum alloy body material, corrosion resistance is strong. Product Advantage

New customer from Nigerian, want to buy Jinyu silicone vulcanizing machine

New customer from Nigerian, want to buy Jinyu silicone vulcanizing machine A new customer from Nigeria, this is a lovely gentleman, he can speak a little Chinese. He came to our factory to see the silicone molding machine.He tasted Chinese tea at our company and we talked happily. Finally, We sent him some Chinese famous teas and silicone products made by our machines. Features of silicone bumper case making machine: 1,Hydraulic machine is the main molding equipment for varieties of silicone rubber products and non-metallic products, has the features of delicate structure,pressure stability,wide applicability,high efficiency. 2,50T can do 4pcs/mould, so each head 4pcs, totally 8pcs/time, 3,Adopt joint oil?accessories,high temperature resistent,low noise,low power consumption. 4,Adopts 24V electrical accessories,PLC,HMI,it has a signal detection function, simple and safe operation. 5,Adopts cast iron str

Old customers want to buy new machines,Pvc product production line

Old customers want to buy new machines,Pvc product production line This customer has worked with us for ten years.We keep their photos,They are our old friends, best friends!Old friend said to continue cooperation with Jinyu!Thank you for your recognition of our pvc dispensing machine and pvc production line.We also welcome all new customers to cooperate with us. Jinyu will not let customers down. This is the product produced by our old customers with Jinyu pvc production line. Plastic dropping complete of equipment manufacturer.

jinyu machine Monthly summary meeting,Celebrate pvc patch dispensing machine big sale!

jinyu machine Monthly summary meeting,Celebrate pvc patch dispensing machine big sale! Jinyu machine's pvc/silicone dispensing machine has been loved by customers and has been well received by customers. Perfect programming support: 1. Humanized software design idea, easy for study and use. 2. Excellent compatibility, support many design software(including JD paint, Auto CAD, Coreidraw) and various file form-wt which generated. In addition, it also support scanning and teaching programming, without and limit on the graphic track planning. 3. Fast parameter setting and debugging, connection with PC, can amend the graphic immediately, and run it right now. Plastic dropping complete of equipment manufacturer. we have cnc machine, and pvc machines, silicone machines, kpu shoes upper machines. website:jinyumachine.en.alibaba.com whatsapp/weChat/Facebook:+8613829130058

The methods and steps of Jinyu`s clothing embossing machine that how to use

1.Prepare mold : copper mold, will need to build a pattern or LOGO trademark carved on the copper mold, molds required neat, smooth surface. 2.Prepare embossing machine: the embossing machine to connect the power supply, heating temperature according to the size of the mold, the amount of glue is generally set at 170-240 degrees, the hot pressing time is also adjusted with the thickness of the product size, in general, the small LOGO in the garment pocket is set in 9-15 seconds; 3.cooling table:The temperature is set in the range of 0--10 degree. 4.Prepare the silicone:Add the color paste and a certain proportion of curing agent, stir it evenly, and send it to the vacuum machine stand for defoaming treatment. 5.Prepare the fabric:Non woven fabric or relatively high temperature resistant fabric can be used to glue the prepared cloth on the slide plate of the embossing machine. 6. Scraping: a hand held the mold, the other hand-held scraper, will draw a vacuum silicon rubber, fill the mold, after the uniform scraping into the vacuum platform, the glue on the mold to remove foam treatment. 7.Remove excess glue: remove the glue on the surface of the mold after the blister, and use the silicon rubber plate to scrape it.

Gum machine For solid silicone coloring

Gum machine For solid silicone coloring. Solid silica gel is milky white, we need to add color paste and Vulcanizing agent to bring up the color we want. It is through the two round through the rotation of the mixture of silica gel and paste, which every five minutes can be adjusted 15 kg of solid silica gel, bring their own cooling effect, so that in the process of spices in the raw material temperature will not be too high.

Silicone Wristband Pressing Embossing Machine

This silicone wristband pressing embossing machine is a kind of letters printing equipment, it is suitable for making all kinds of rubber silicone products, like the wrist strap, phone cover, labels watchband, etc. The mainly functions of the silicone wristband pressing equipment is heating pressing by the up and down heating plate, vulcanizing the solid rubber silicone material into the shape. Our factory can support the machine, mold and material for you if you need. If you make the wristband, we could teach you the whole process, that needs dispensing machine, hydraulic machine, and embossing machine, etc. we provide the whole set of equipment for the production process line. With more than 20 years of independent research and development for silicone and PVC production making, Jinyu machinery has a senior and specialized group. Jinyu company have set up a good reputation within the industry and become the earliest production base of PVC products making machine , silicone products making machine and other related machines all over the world .

The plastic keychains dropping machine

The plastic keychains dropping machine can replace 4-6 skilled workers for filling the logo of the mold with the liquid material, like the silicone and pvc, etc. We have 8 colors and 12 colors, you can choose the suitable one you need, normally if you produce the pvc products, you can choose the 12 colors , and the silicone products, choose the 8 colors is ok.

silicone trademark moulding machine for hats

silicone trademark moulding machine for hats is for moulding silicone trademark onto garment , T-shirt , fabrics , socks , gloves , sweater , cloth piece by piece etc. It can made in soft design and very popular in the market. The thickness of the silicone logo also can be controlled. The raw material is liquid silicone. Main features of woven labels garment label machine: 1.The machine adopt special structure make its stress mode like a figure of [gong" with scientific force analysis, make it stable and firm. 2.Heating plate used for deep hold processing, and after carburizing, nitriding completed after grinding ,using the principle of heat, the high accuracy, the optimal design with average temperature ,HRC50-55 hardness, wear a long time, Not easy to out of shape and it has high plane precision. 3.Using the technology of planar pressure correction, the maximum pressure (20KG) nut leveling device, the highest plane precision can reach 0.05MM. 4.Uniqquie circuit design ,with single motor ,single pump control double circuit , no impact in operation and improve the efficiency, reduce energy consumption. 5.Special design ,hydraulic system and no vibration, good stability, access mode ,decrease rise faster than the peer machine. 6.Intelligent PID control output ,the difference of set temperature and actual temperature controlled in +- 1 degree. It is economic and energy-saving . 7.Importing the latest digital prototype testing technology, higher thermal performance, better stability

What is the problem with dispensing operations that is often encountered during dispensing/epoxy dispensing?

What is the problem with dispensing operations that is often encountered during dispensing/epoxy dispensing? Therefore, the instability of automatic dispensing is one of the most common reasons for dispensing glue in the production of plastics. The main manifestations are the inconsistent size of glue, drawing and tailing. There are many factors causing the instability of the dispensing shape. Among them, the inaccuracy of the dispensing time control and the instability of the equipment platform, the inappropriate size of the dispensing needle, the unstable fluctuation of the gas source, and the incomplete recovery of the dispensing valve The most common factor. Automatic dispensing machines and dispensing machines are increasingly used in the bonding of semiconductor lighting products. The problem of dispensing fluorescent powder is also increasing. Phosphor precipitation causes the color temperature value of dispensing products. Inconsistent, the packaging effect will also be affected, so in the process of packaging the LED, you need to pay special attention to phosphor precipitation.