Maintenance Of Rubber Patch Dispensing Machine

2023-07-27

The daily maintenance work of the Dispensing Machine will directly affect the quality of the dispensing, work efficiency, and service life. So we must do a good job in the maintenance of the dispensing
machine in daily use. The maintenance of the dispensing machine is mainly the several points:

Rubber patch machine

1. First, when the glue needs to be replaced, clean the pipe. Then,turn off the feed valve, open the discharge valve, and drain the residual glue in the barrel. Next, turn off the discharge valve, open the feed valve, and pour the cleaning solvent into the glue barrel. Last, activate the machine and press out the solvent according to the usual steps.

2. Regular cleaning machine work tabel, keep clean, can prolong the the service life of the dispensing machine.

3. The pressure is not normal, and found water vapor, please be pressure within the filtered water out, or check the pressure the source is not unusual.

4. The often moving parts of the dispensing machine should always be buttered and keep lubricated.

5. The dispensing machine is in a state of non-use for a long time the power supply should be closed.It can prolong the life of the machine and save electricity.

20dispensing

Dispensing machine also called PVC Patches Machine, Silicone Patches Machine, Liquid dropping machine, Plastic dripping machine, injection machine, etc. Jinyu machinery provide the whole set of Silicone Machines, PVC Machines, and kpu machines.

Previous: Pvc Label Dispensing Machine

Next: What's The Mainly Function Of the PVC Injection Machine?