HomeNewsHow to maintain the silicone embossing cooling machine
How to maintain the silicone embossing cooling machine
2018-03-13
How to maintain the silicone embossing cooling machine
1.Check the air filter and coolant level of the cooling machine;
2. Check whether the hose and all pipe joints are leaking; 3. Check the records. If the consumable parts have reached the replacement cycle, they must be stopped and replaced; 4, check the record, when the host exhaust temperature at or close to 98 ℃, must wash oil cooler; 5. Check the records. If the separator pressure reaches 0.68BAR (limit 1BAR) or the pressure difference begins to have a downward trend, the separation core should be replaced. 6. Check the discharge of condensed water. If it is found that the displacement is too small or does not have condensation water discharge, the water separator must be shut down.
The operation instructions of the clothing embossing cooling machine.
Please confirm that this cooling machine has been connected to 380V power supply.
First, switch on the power line.
Adjust the cooling temperature of the mould.
4. Place the mould on the aluminum plate.
5. During the production process, please turn off the power in time.
6. In the process of operation, please do not break the work table gently.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
We will contact you immediately
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.