Communicate with Supplier? Supplier
Bear Ms. Bear
What can I do for you?
Contact Supplier
 Tel:86-0769-85624738
Home > Industry Information > the production processes of silicone products and silicone machine
Online Service

Ms. Bear

Leave a message
Contact Now

the production processes of silicone products and silicone machine


the production processes of silicone products and Silicone Machine

With the rapidly developing of silicone products industry, more and more silicone products play an important role in our daily life. At this time we found that some silicone products are hard, some others are soft, so next let's discuss the characteristic of these two processes .
Hardness and softness of silicone product is decided by the different production process,generally include liquid process and solid-state process.
Silicone Liquid
1.Liquid process
silicone vacuum machineDispensing Machinejua
Using this process can produce low degree silicone products, such as from 0 degrees to 20 degrees, even its hand feeling is very sticky, this silicone products produced rarely, and develop a set of liquid silicone mold is also expensive. Silicone products from 10 degrees to 20 degrees, for some complex pieces of silicone products, silicone products made by liquid process is difficult to split, because of material, so that the product flash is not smooth. Low degree silicone products, and its requirement for self removal isn't very strict. need silicone Vacuum Machine, Silicone Dispensing Machine
silicone dispensing machine (2)
2.Solid-state process

Another is the solid-state process,now using this process can produce the silicone products that the lowest degree is 30 degrees, the highest degree is 80 degrees, even if can produce higher degree of products,leaving to its poor rate is too high, The product is fragile, and will be difficult to since the split.Therefore, the most suitable degree using this process produced silicone products is between 30 degrees to 70 degrees. Need a rubber cutting machine, a rubber mixing machine, a Hydraulic Machine
Solid Silicone Mixing Machinesilicone cutting machine
For silicone products of from 10 degrees to 20 degrees,whether liquid or solid-state production process has difficulty in some extent, so few silicone products manufacturer will produce this kind of products. In summary, the production process of silicone products is complex.
Related Products List